J. Dobrić, B. Rossi (2020) Column Curves for Stainless Steel LippedChannel Sections. Journal of Structural Engineering. () DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0002708[M21]
T. Molkens, J. Dobrić, B. Rossi (2019) Shear resistance of headed shear studs welded on welded plates in composite floors. Engineering Structures. (), pp.1-16. DOI: https://doi.org/10.1016/j.engstruct.2019.109412[M21]
1. J. Dobrić, Z. Marković, D. Buđevac, M. Spremić, N. Fric (2018) Resistance of cold-formed built-up stainless steel columns Part I: Experiment. Journal of Constructional Steel Research. 145 (), pp.552-572. DOI: 10.1016/j.jcsr.2018.02.02[M21]
J. Dobrić, M. Pavlović, Z. Marković, D. Buđevac, M. Spremić (2018) Resistance of cold-formed built-up stainless steel columns Part II: Numerical simulation. Journal of Constructional Steel Research. 140 (), pp.247-260. DOI: 10.1016/j.jcsr.2017.10.032[M21]
J. Dobrić, D. Buđevac, Z. Marković, N. Gluhović (2017) Behaviour of stainless steel press-braked channel sections under compression. Journal of Constructional Steel Research. vol. 139 (), pp.236 - 253. DOI: 10.1016/j.jcsr.2017.09.005[M21]
M. Spremić, Z. Marković, J. Dobrić, M. Veljković, D. Buđevac (2017) Shear connection with groups of headed studs. Gradjevinar. 69 (5), pp.347-426. DOI: doi.org/10.14256/JCE.1701[M23]
J. Dobrić, Z. Marković, D. Buđevac, Ž. Flajs (2015) Specific features of stainless steel compression elements. Građevinar. (), pp.143-150. DOI: 10.14256/JCE.1128.201[M23]
Z. Marković, D. Buđevac, J. Dobrić, N .Fric, M. Knežević (2012) Specific behaviour of thin-walled member joints with fasteners. Građevinar. 64 (), pp.217-230. [M23]
Kostadinović Vranešević K., Gluhović N., Dobrić J., Spremić M. (2019) Poređenje ponašanja tankih cilindričnih i konusnih ljuski od ugljeničnog i nerđajućeg čelika. Građevinski materijali i konstrukcije. 62 (1), pp.27-42. DOI: 10.5937/GRMK1901027K[M24]
I. Jakovljević, J. Dobrić, Z. Marković (2019) Flexural buckling of hot-finished and cold-formed elliptical hollow section columns: Numerical comparative analysis. Građevinski materijali i konstrukcije. 62 (2), pp.15-32. DOI: 10.5937/GRMK1902015J[M24]
Filipović A., Dobrić J., Spremić M., Marković Z., Gluhović N. (2017) Numerička analiza nosivosti neuniformnih pritisnutih elemenata na fleksiono izvijanje. Građevinski materijali i konstrukcije. 60 (3), pp.3-14. DOI: 10.5937/grmk1703003F[M24]
Међународне конференције
J. Dobrić, Z. Marković, D. Buđevac (2017) Shear Stiffness of Closely Spaced Built-up Stainless Steel Columns. In: Fifth International Experts Seminar: Stainless Steel in Structures. [M31]
J. Dobrić, Z. Marković, D. Buđevac (2017) Behaviour of built-up stainless steel members subjected to axial compression. In: Proceedings of conference 2017: Contemporary Civil Engineering Practice. [M31]
Z. Marković and J. Dobrić (2017) Athletic hall structure in Belgrade. In: Proceedings of conference 2017: Contemporary Civil Engineering Practice. [M31]
J. Dobrić (2016) Behaviour of built-up stainless steel members subjected to axial compression. In: Simpozijum 2016 DGKS-Knjiga rezimea. [M31]
Z. Marković, M. Živanović, J. Dobrić, D. Buđevac (2016) Konstrukcija alletske dvorane u Beogradu. In: Simpozijum 2016 DGKS-Knjiga rezimea. [M31]
Z. Marković, N. Fric, J. Dobrić (2012) Specifični problemi kod čeličnih konstrukcija vetroparkova. In: 8. Međunarodni naučni skup Savremena teorija i praksa u graditeljstvu. [M31]
Z. Marković, M. Spremić, V. Koković, J. Dobrić, M. Pavlović, N. Fric (2011) Projekat konstrukcije višespratne otvorene javne garaže u Kartumu. In: 7. Međunarodni naučni skup Savremena teorija i praksa u graditeljstvu. [M31]
Z. Marković, D. Buđevac, J. Dobrić (2010) Dejstvo vetra na konstrukcije prema Evrokodu. In: 6. naučni skup Savremena teorija i praksa u graditeljstvu. [M31]
N. Gluhović, M. Spremić, B. Milosavljević, Z. Marković, J. Dobrić (2019) Ductility of different types of shear connectors - experimental and numerical analysis. In: The international colloquium on stability and ductility of steel structures. [M33]
Filipovic A., Dobric J., Markovic Z., Baddoo N., Spremic M., Fric N. (2019) Experimental Investigation of Compressed Stainless Steel Angle Columns. In: The international colloquium on stability and ductility of steel structures. [M33]
T. Molkens, J. Dobric, B. Rossi (2019) Headed shear stud welded on welded plates in composite floor applications. In: International Conference for Steel and Aluminium Structures. [M33]
T. Molkens, J. Dobric, B. Rossi (2019) Influence of the concrete shear capacity on the failure behaviour of composite decks. In: International Conference for Steel and Aluminium Structures. [M33]
I. Jakovljević, Z. Marković, J. Dobrić (2018) Numerical evaluation of flexural buckling of hot-finished and cold-formed EHS columns. In: Proceedings of 15th Congress ASES 2018. [M33]
A. Filipović, J. Dobrić, Z. Marković, D. Buđevac, N. Fric (2018) Experimental investigation of compressed stainless steel angle columns. In: Proceedings of 15th Congress ASES 2018. [M33]
Đ. Jovanović, D. Žarković, J. Dobrić (2018) DESIGN AND APPLICATION OF COLD-FORMED THIN-WALLED MEMBERS. In: Proceedings of 14th International Scientific Conference iNDiS 2018. [M33]
Kondić S., Dobrić J., Gluhović N. (2018) Design of pedestrain bridge according to Eurocode 9. In: ASES International Congress proceedings. [M33]
J. Kruškonja, J. Dobrić, N. Gluhović (2018) Resistance and serviceability analysis of steel footbridge structure according to Eurocode. In: Proceedings of 15th Congress ASES 2018. [M33]
J. Dobrić, M. Spremić, Z. Marković, B. Ninić, J. Milovanović (2017) Comparative numerical buckling analysis of compressed carbon and stainless steel members at elevated temperatures. In: Special Issue: Proceedings of Eurosteel 2017. DOI: 10.1002/cepa.533[M33]
J. Dobrić, Z. Marković, D. Buđevac, M. Spremić (2017) Maximum chord slenderness ratio of compressed stainless steel closely spaced built-up members. In: Special Issue: Proceedings of Eurosteel 2017. DOI: 10.1002/cepa.159[M33]
М. Spremić, N. Gluhović, Z. Marković, J. Dobrić, А. Filipović (2017) Comparison of headed studs with perfobond shear connectors - Experimental and Numerical Analysis. In: Special Issue: Proceedings of Eurosteel 2017. DOI: 10.1002/cepa.270[M33]
Filipović A., Dobrić J., Spremić M., Marković Z., Gluhović N. (2016) Numerička analiza nosivosti neuniformnih pritisnutih elemenata na fleksiono izvijanje. In: Društvo građevinskih konstruktera Srbije, Zbornik radova 2016. [M33]
Ivanović N., Marković Z., Dobrić J., Spremić M., Gluhović N. (2016) Numerical lateral buckling analysis of aluminuom alloy beams with chanel sections. In: Društvo građevinskih konstruktera Srbije, Zbornik radova 2016. [M33]
M. Tošković, M. Spremić, Z. Marković, J. Dobrić/ (2016) Komparativna analiza proračuna rešetkastog tornja prema SRPS i EN 1993. In: Društvo građevinskih konstruktera Srbije, Zbornik radova 2016. [M33]
M. Spremić, Z. Marković, J. Dobrić, D. Buđevac (2016) Shear resistance of longitudinal shear connection with groups of headed studs. In: Šesti internacionalni naučno-stručni skup GRAĐEVINARSTVO NAUKA I PRAKSA, Žabljak. [M33]
Z. Marković, M. Spremić, J. Dobrić, A. Filipović, N. Gluhović (2016) ANALIZA NOSIVOSTI NEUNIFORMNIH ELEMENATA NA FLEKSIONO IZVIJANjE. In: Šesti interancionalni naučno-stručni skup Građevinarstvo-nauka i praksa - Zbornik radova. [M33]
Gluhović N, Marković Z, Spremić M, Dobrić J (2015) DESIGN RECOMMENDATIONS OF FLOOR VIBRATIONS INDUCED BY HUMAN ACTIVITIES. In: 16th INTERNATIONAL SYMPOSIUM OF MASE Ohrid. [M33]
Jelena Dobric, Zlatko Markovic, Dragan Buđevac, Milan Spremić, Nenad Fric (2015) STAINLESS STEEL CROSS-SECTION RESISTANCE ACCORDING TO CONTINUOUS STRENGTH METHOD. In: iNDiS 2015 Planiranje, projektovanje, građenje i obnova graditeljstva TRINAESTA MEĐUNARODNA NAUČNA KONFERENCIJA. [M33]
Nenad Fric, Dragan Budjevac, Zoran Miskovic, Milan Veljkovic, Zlatko Markovic, Jelena Dobric (2015) CALIBRATION OF THE HIGH STRENGHT BOLTS FOR MEASURING OF THE PRETENSION FORCE. In: Eighth International Conference on ADVANCES IN STEEL STRUCTURES. [M33]
Jelena Dobric, Zlatko Markovic, Dragan Buđevac, Milan Spremić, Nenad Fric, Marko Pavlović (2015) EXPERIMENTAL INVESTIGATION OF FLEXURAL BUCKLING OF COLD FORMED BUILT-UP STAINLESS STEEL MEMBERS. In: Eighth International Conference on ADVANCES IN STEEL STRUCTURES. [M33]
Z. Marković, N. Gluhović, J. Dobrić, N. Fric (2014) The latest European recommandations regards to beam-column end plate connections. In: 5th International Conference Civil Engineering Science and practice Žabljak. [M33]
Fric N., Budjevac D., Z. Marković, J. Dobrić, J. Isaković (2014) Huck bobtail fastening system new solution for high-strength lockbolts. In: 5th International Conference Civil Engineering Science and practice Žabljak. [M33]
Z. Marković, A. Bojović, M. Pavlović, M. Spremić, D. Aleksić, A. Mora (2014) Glavni projekat konstrukcija gornjeg stroja novog železničko-drumskog mosta u Novom Sadu. In: 10. Međunarodni naučni skup Savremena teorija i praksa u graditeljstvu. [M33]
S. Živanović, R.P. Johnson, H.V. Dang, J. Dobrić (2013) Design and Construction of a Very Lively Bridge. In: IMAC-XXXI Conference and Exposition of Structural Dynamics. [M33]
N. Fric, B. Gligić, J. Dobrić, Z. Marković (2012) Wind tower design of friction connections for asembling sections of tubular steel tower. In: 4th International conference - Civil engineering Science and Practice. [M33]
Z. Marković, J. Dobrić, M. Spremić, N. Fric (2012) Novi koncept proračuna aluminijumskih konstrukcija prema Evrokodu. In: 12. međunarodna naučna konferencija Planiranje, projektovanje, građenje i obnova graditeljstva - INDIS 2012. [M33]
J. Dobrić, Z. Marković, M. Spremić, N. Fric (2011) Analysis of stainless steel member in axial compression. In: International symposium about research and application of modern achivements in civil engineering in the field of materials and structures. [M33]
J. Dobrić, M. Pavlović, Z. Marković, D. Buđevac (2010) Specifičnosti centrično pritisnutih elemenata od nerđajućeg čelika. In: Treći Internacionalni naučno-stručni skup Građevinarstvo nauka i praksa. [M33]
M. Spremić, D. Buđevac, Z. Marković, J. Dobrić (2008) Uporedna analiza punih i parcijalnih smičućih spojeva kod spregnutih nosača. In: Drugi Internacionalni naučno-stručni skup Građevinarstvo nauka i praksa. [M33]
J. Dobrić, D. Buđevac, Z. Marković, M. Spremić (2008) Proračun rešetkastih nosača od šupljih profila prema Evrokodu 3. In: Drugi Internacionalni naučno-stručni skup Građevinarstvo nauka i praksa. [M33]
D. Buđevac, Z. Marković, J. Dobrić (2006) Nosivost prostornih veza od šupljih profila prema EC3. In: Kongres JDGK 2006. [M33]
J. Dobrić (2005) Proračun čvorova rešetkastih nosača od šupljih profila prema Evrokodu 3. In: JUDIMK 2005. [M33]
D.Buđevac, B. Gligić, J.Dobrić (2004) Bočno torziono izvijanje aluminijumskih greda prema Evrokodu 9. In: Simpozijum JDGK 2004. [M33]
D. Buđevac, Z. Marković, M. Spremić, J. Dobrić (2003) Steel structure of the pyramid of buisness and trade centre in Hanti Mansijsk. In: International symposium MASE 2003. [M33]
D. Buđevac, Z. Marković, J. Dobrić (2003) Structures of Delta sport building in Belgrade. In: International symposium MASE 2003. [M33]
D. Budjevac, Z. Marković, M. Spremić, J. Dobrić (2003) The review of the standard antenna towers for the needs of Serbian mobile telephony. In: International symposium MASE 2003. [M33]
D.Buđevac, B. Gligić, J. Dobrić (2002) Granično stanje upotrebljivosti aluminijumskog profila klase 4 prema Evrokodu 9. In: Kongres JDGK 2002. [M33]
Домаће монографије
D. Buđevac, Z. Marković, J. Dobrić (2005) Aksijalno pritisnuti elementi jednodelnog poprečnog preseka, prema Evrokodu 3. Građevinski kalendar 2005. (), pp.137 - 159. [M45]
D. Buđevac, Z. Marković, J. Dobrić (2003) Proračun spojnih sredstava prema Evrokodu 3. Građevinski kalendar 2003. (), pp.408 - 428. [M45]
D. Buđevac, Z. Marković, J. Dobrić (2002) Proračun elemenata čeličnih konstrukcija opterećenih na savijanje prema Evrokodu 3. Građevinski kalendar 2002. (), pp.354 - 395. [M45]
Домаћи и М53 часописи
M. Spremic, Z. Markovic, J. Dobric, D. Budjevac (2016) Shear resistance of longitudinal shear connection with groups of headed studs. International Journal of Applied Engineering Science. 14 () DOI: 10.5937/jaes14-10471[M51]
N Fric, D. Budjevac, Z. Miskovic, Z. Markovic, J. Dobric (2016) USAGE OF ZINC-SILICATE COATINGS IN FRICTION CONNECTIONS. International Journal of Applied Engineering Science. 14 (), pp.128-134. DOI: 10.5937/jaes14-10450[M51]
N. Fric, D. Budjevac, Z. Marković, J. Dobrić, J. Isaković (2014) Huck bobtail fastening system new solution for high-strength lockbolts. Journal of Applied Engineering Science. 12 (), pp.23-28. [M51]
N. Fric, B. Gligić, J. Dobrić, Z. Marković (2012) Wind tower Design of friction connections for asembling sections of tubular steel towers. Journal of aplied engineering science. 10(2012) (), pp.49-52. DOI: 10.5937/jaes10-1670[M51]
Marković Z., Dobrić J., Gluhović N. (2020) Comparison of wind actions according to Еurocode and previous regulations. Scientific Journal of Civil Engineering. 9 (1), pp.83-92. [M52]
J. Dobrić, Z. Marković, D. Buđevac, M. Pavlović (2012) Primena nerđajućih čelika u građevinarstvu. Građevinski kalendar 2012. () [M52]
Marković Z., Dobrić J., Gluhović N. (2013) Primena aluminijumskih legura u građevinskim konstrukcijama. Savremeno graditeljstvo. (11/12), pp.42-55. [M53]
Домаће конференције
K. K. Vranešević, N. Gluhović, J. Dobrić, M. Spremić (2018) Poređenje ponašanja tankih cilndričnih ljuski od ugljeničnog čelika i nerđajućeg čelika. In: Zbornik radova sa nacionalnog kongresa, Društvo građevinskih konstruktera Srbije. [M63]
Jelena Dobric, Zlatko Markovic, Dragan Buđevac, Nina Gluhovic (2015) Mathematical interpretation of nonlinear relationship of stainless steel stres and strain. In: Građevinski materijali u savremenom graditeljstvu, Zbornik radova. [M63]
! Сајт је оптимизован за Firefox, Chrome и IE 9+ ЛуАн-011